Key Features
- Continuous preamp gain with a switchable gain-linked loudness trim
- Low impedance mode, 20 dB pad, and polarity switch
- Variable high-pass filter and output attenuation
- Stereo, dual mono, and mid-side processing
- Oversampling up to 8x on the saturation stage
- Response, spectrum, and phase displays
Description
Ferrule Pre is a free microphone and line preamp plugin from GANUE Audio. It puts a continuous gain control, a low impedance mode, a pad and a variable high-pass filter into a compact 500-series style interface.
The official Gumroad page provides both builds. GANUE says the Windows installer is unsigned and may trigger Microsoft SmartScreen, while the Mac installer is signed and notarized.
Gain drives the saturation stage while the output compensation helps keep the level steady. That makes it easier to compare a little color on a drum loop with heavier drive on a guitar or bass without judging the louder pass as better.
The output attenuator and separate input and output trims give you control over the level feeding the next plugin. Stereo, dual mono, and mid-side modes let you decide whether to process channels together or shape them independently.
The saturation stage offers up to 8x oversampling with minimum or linear phase modes. GANUE documents a slight fixed tonal curve and notes that strong drive can produce aliasing, especially at lower oversampling settings.
Video Preview
Frequently Asked Questions
Does Ferrule Pre require a license or activation?
No plugin license or activation is required. The developer uses Gumroad to deliver the installers, and Gumroad may ask for an email address.
Can I drive the preamp without making the track louder?
The plugin applies predicted loudness compensation and adds a switchable gain-linked trim. Use the separate output attenuator to compare drive settings at similar levels.
Are the installers signed?
GANUE reports that the Mac installer is signed and notarized. GANUE says the Windows installer is unsigned and may trigger SmartScreen.